Flooring cost in Dallas, TX (2026)
For a typical 500 sq ft flooring in the Dallas metro, mid-range typically runs $6,026. Labor here averages 4% below national trade wages, with materials at each tier's quality level and contractor overhead applied the way contractors actually bill.
Standard-tier breakdown, line by line
| Line item | Category | Typical cost |
|---|---|---|
| Flooring material | Material | $2,500 |
| Flooring installation | Labor | $1,096 |
| Baseboards | Material | $600 |
| Remove existing flooring | Labor | $524 |
| Subfloor preparation and leveling | Labor | $365 |
| Baseboard installation | Labor | $365 |
| Underlayment | Material | $250 |
| Old flooring disposal | Disposal | $150 |
| Adhesive, fasteners, spacers | Supplies | $100 |
| Transition strips | Material | $75 |
| Total (incl. overhead) | $6,026 |
Dallas trade wages behind this estimate
| Trade | SOC | Median /hr | vs. national |
|---|---|---|---|
| Carpenters | 47-2031 | $26.10/hr | −2% |
| Construction Laborers | 47-2061 | $18.70/hr | −7% |
This page shows the typical range. Your project isn't typical — build the line-item estimate for your exact scope in the free iOS app.
Get Renovio for iPhoneFloorings often require permits. See what Texas requires and who issues it.
Texas permit guide →Floorings — what homeowners ask
Flooring costs range from $3-$25 per square foot installed. Vinyl and laminate run $3-$8/sqft, hardwood costs $8-$15/sqft, and premium tile or natural stone can reach $15-$25/sqft. A 1,000 sqft flooring project typically costs $5,000-$15,000.
Porcelain tile and luxury vinyl plank (LVP) are the most durable options for high-traffic areas. Hardwood is durable but requires maintenance. LVP offers the best balance of durability, water resistance, and cost.
Professional flooring installation for a typical room takes 1-3 days. A whole-house flooring project (1,500-2,000 sqft) usually takes 3-7 days depending on the material and subfloor preparation needed.